Categories
Currencies
Manufacturers
  • AINOL
  • ASUS
  • AULA
  • CANON
  • CHUWI
  • CUBOT
  • DOOGEE
  • EDUP
  • ESCAM
  • HYUNDAI
  • LENOVO
  • NIKON
  • ONDA
  • PENTAX
  • PIPO
  • SJCAM
  • SZSINOCAM
  • TECLAST
  • TENDA
  • THL
  • ULEFONE
  • XIAOMI
  • YELANGU
  • ZOPO

MICROPHONE

/
Displaying 1 to 6 (of 6 products)
  • Handheld Wireless, Wired Microphone with Receiver and Antenna

    Handheld Wireless, Wired Microphone with Receiver and Antenna

    Operation: 1) Screw off the housing, insert a battery (size AA) with the correct polarity and screw on the housing before inserting the telescopic antenna and set the switch to the ON position. The pilot lamp is on at this time. Insert another battery (size AAA) into the receiver with the correct polarity. Set the switch of receiver to ON position, then the pilot lamp is on that indicate a good condition. After that, plug the receiver into the input socket for microphone of amplifier and it is ready for operation. 2) When you need temporary stop during singing and you don't want the microphone to pick up any other sound, you may set the switch to the middle (MIC) position. Now, the lamp is still on Use it as wired microphone. 3) Take out the battery from the microphone, connect the wire to the microphone and set the switch to MIC position. Attentions: 1) If acoustic quality and volume are abnormal or receiving distance is shorted, the batteries in wireless microphone and receiver should be replaced, If thereafter still not in normal operation, you can carefully trim the frequency of receiver with a screwdriver to become normal operation, you can carefully trim the frequency of receiver with a screwdriver to become normal operation. 2) If your microphone isn't used for a long period, the battery should be taken out to avoid its deterioration and the damage of components. 3) If two wireless microphones are used at the same time, you must use them with one red and another green lamp and can't use them with the lamp of the same color.   Specifications: 1) Microphone sensitivity:-72db 2) Directivity: unidirectional 3) Frequency response: 100 to 10,000 Hz 4) Output impedance: 600 ohm 5) Operating voltage: 1.5V 6) Effective distance: 15 to 30m **Package Contents: -1x Microphone -1x Receiver -1x Wireless antenna -1x Wire for wired microphone  

  • Wireless, Wired Microphone with Receiver and Antenna

    Wireless, Wired Microphone with Receiver and Antenna

    Operation: 1) Screw off the housing, insert a battery (size AA) with the correct polarity and screw on the housing before inserting the telescopic antenna and set the switch to the ON position. The pilot lamp is on at this time. Insert another battery (size AAA) into the receiver with the correct polarity. Set the switch of receiver to ON position, then the pilot lamp is on that indicate a good condition. After that, plug the receiver into the input socket for microphone of amplifier and it is ready for operation. 2) When you need temporary stop during singing and you don't want the microphone to pick up any other sound, you may set the switch to the middle (MIC) position. Now, the lamp is still on Use it as wired microphone. 3) Take out the battery from the microphone, connect the wire to the microphone and set the switch to MIC position. Attentions: 1) If acoustic quality and volume are abnormal or receiving distance is shorted, the batteries in wireless microphone and receiver should be replaced, If thereafter still not in normal operation, you can carefully trim the frequency of receiver with a screwdriver to become normal operation, you can carefully trim the frequency of receiver with a screwdriver to become normal operation. 2) If your microphone isn't used for a long period, the battery should be taken out to avoid its deterioration and the damage of components. 3) If two wireless microphones are used at the same time, you must use them with one red and another green lamp and can't use them with the lamp of the same color.   Specifications: 1) Microphone sensitivity:-72db 2) Directivity: unidirectional 3) Frequency response: 100 to 10,000 Hz 4) Output impedance: 600 ohm 5) Operating voltage: 1.5V 6) Effective distance: 15 to 30m **Package Contents: -1x Microphone -1x Receiver -1x Wireless antenna -1x Wire for wired microphone  

  • Super Uni-directional Electret Condenser Microphone

    Super Uni-directional Electret Condenser Microphone

    Specifications:     1) Energy exchange: condenser 2) Directional: uni-ultra-directional 3) Frequency response: 100-1600Hz 4) Output impedance: 1K ? for distance, 2.3K ? or long distance 5) Power supply: DC 1.5V 6) Sensibility: -45dB for short distance, -38dB for long distance 7) Load batteries properly accoring to the +, - marks on the microphone battery shell, fix the audio frequency output cable, and then cap the anti-wind foam 8) Switch on, and push the siwtch to the fist archive for short distance application, or to the second archive for long distance application 8) Size: 36.2x2x2cm 9) Weight: 128g 10) Line length: 9m  

  • Electret Condenser Microphone

    Electret Condenser Microphone

    Specifications:     1) Power: 3V / 800mA Li-on battery 2) Power consumption: about 0.35Ma 3) Input plug socket: Glided L type stereo sound mini plug with 3.5mm, wire length 35cm 4) Using time: over 1000 hours 5) Dimensions: 21 x 250mm 6) Weight: 110g 7) Frequency response: 40Hz-2000KHz 8) Direction: Hyper-cardioid 9) Sensitivity: -4.5 + 2dB 10) S / N ratio: 76dB 11) Max input SPL: 125dB  

  • Professional Wired Classical Dynamic Microphone

    Professional Wired Classical Dynamic Microphone

    Specifications:     1) Professional vintage microphones 2) KTV microphone 3) Classical style 4) Material: Zinc alloy 5) Magnetic switch 6) Advantage: -Classic network microphone, KTV microphone -Consistent super cardioid pattern provides the best gain-before-feedback among dynamic microphones -It is ideal for professional audio applications for its reliable stability and easy operation 7) Properties: Dynamic 8) Output impedance: 600ohms 9) Pattern: Cardioid 10) Sensitivity: -53db 11) Frequency response: 50Hz-13KHz 12) Wire jack: XLR 3 PIN 13) Length: 18cm 14) Microphone head size: 95mm x 80mm x 55mm  

  • 4 Channels Wireless Handheld Microphone System

    4 Channels Wireless Handheld Microphone System

    Specifications:   Wide frequency response, high S/N ratio Resist disturbing strongly, be standing by noise output to zero Super silent function, low T.H.D No hitting when putting on the switch, so can protect the amplifier and speakers With a complete working state and power level indicating With a wide using range for over 100m in a good surrounding, for 30-50m in a duplicate one Independent and balanced output, designed applied to large place A double-way channels designed, two hands holding each two microphones at the same time to sing without any disturbing causes by used in the entertainment places as a large or a middle stage, karaoke hall or at hone etc.   1) Frequency: 500-550MHZ 2) Frequency steadying: <0.002% 3) F/N Ratio: >70db 4) Audio output: 0-300mV 5) Receiving channel: 4ch 6) Power voltage: AC 220V/ AC 110V 7) Antenna: directions dragging antenna 8) Size of receiver: 420 x 220 x 45mm 9) Microphone: 600 single way 10) Battery of microphone: 9V layers style 11) Size of microphone: 240 x 35mm  

/
Displaying 1 to 6 (of 6 products)

Supported by Hairbox | Cameracyprus | Caretaxi Cyprus | Handmadecandles

© Digimaxonline | 2017 All rights reserved